These M6 paddock stand / crash protector bobbins for the Tuono V4 have been made from high quality acetal with aluminium inserts that allow extra spacing if the boss is not flush with the outer face of the swing arm.

Can be fitted in minutes and they look great too.

• Finish: Black
• Fitting Difficulty: 1 (1 low - 5 high)
• Fitting Time: 5 mins

M6 Paddock Stand / Crash Protector Bobbins Fitting Advice:

Please note that when fitting paddock stand bobbins, ensure they don't make contact with any other part of the machine. You should also check that there is adequate clearance when the suspension is fully compressed. Also make sure there is adequate clearance between the paddock stand bobbins and the silencer, especially when a non-standard exhaust system has been fitted. It is your responsibility to ensure that the bobbins have been fitted safely and in accordance with these instructions. 

Please also note that paddock stand bobbins are designed to support the weight of the motorbike during storage and routine maintenance and service. They are not designed to withstand the additional weight of sitting on the bike.

Installation Instructions (PDF)